where do i hook my boost gauge at on my stock 5.0 intake and throttle body? where do i tap it at? looking where it will read Accurate. If some one can help me out it would be nice just looking for some info. Thanks ~Zach~
where do i hook my boost gauge at on my stock 5.0 intake and throttle body? where do i tap it at? looking where it will read Accurate. If some one can help me out it would be nice just looking for some info. Thanks ~Zach~
Anywhere after the throttle body...
Ian
do i use a tee? or tap it in the intake? How bout the throttle body Spacer?
Sure you can run the gauge off a T from the back of the intake.
I would not tap the TB spacer just in case you ever want to sell it, or if you decide to take the blower off.
Using the T will make for a very easy and clean install.
Ian
k one more thing T- it off from what hose? anyone got a pic of something so i can get a good look?
You can T it off any vac line coming from the intake, sorry I do not have a pic..
Ian
K thanks alot Ian! Ill see how it comes out and tell u all thanks again!
Hey i got my upper intake off and i see 4 hoses under neath it what are them and which one can i use. what size is the Tee that i need?
go for one of the smaller ones as i'm sure the gauge install setup has a small hose.
Hey BTW. You gonna be ready to rock @ smackdown?
89 Coupe with parts stacked inside of it and about 30#'s of dust on it with no end in sight. :weird:
Although I am collecting parts for a 12.5:1 393 :D
K got the gauges in took about 4 1/2 hours to put the Triple pillar 2 1/16 gauges in. K now on my stock Sn-92 with the stock pulley says Max 7psi!!! And Vac. Idleing is -15 What about ur guys ideling? and Thanks All For everyones help i love them they look great :) Smackdwon yeppers~
Bookmarks