hey guys, new here, looking at getting a Novi 1000 for my gf's car. we just bought a 306 rotating assembly, so now just have to get the block machined and assembled. now, i have my heart set on the novi 1000 already, since i cant afford the 2000, and the 1000 will give more then enough power. i have already asked many people what i should do for mods, but i figured i would finally sign up after lurking here and reading posts for the last 3 or 4 days. now my gf's motor is 100% stock (well, k&n filter, but i know those are huge power adders :p) and has 260,000 kms, hence the 306 rebuild. what i plan on running is: novi 1000, pro-m 75mm, 36lbs injectors, walbro gss340 pump, 70mm TB, e-cam, 1.7 roller rockers, 8" crank pulley, upr power pipe and some sort of fuel pressure regulator. im looking to get 10psi out of this, and will be running stock intake and heads (intake will be replaced ALOT sooner then heads). anything im missing? anything else you guys would recommend or change? i was told to expect around 320rwhp with this setup. thanks guys! anyone else from bc canada here btw?
Bookmarks