-
Junior SCH Member
Blowthrough Carb Setup on Alcohol
I am in the process of researching a blow through carb setup for a 393 Windsor I am building to run in some Unlimited Drag Radial 1/8 mile racing. I was wondering if anyone has ever used alcohol on a blowthrough setup. I was considering this because it will allow me to run a higher compression with boost without risking detonation, say 9.5 to 10 to 1 with 17-20 lbs of boost. Will be more than likely using a Procharger F1R. One of the problems I can foresee is that is fuel volume required as I have read alcohol takes about a 2 to 1 ratio compared to gas and I know blow through setup alredy require alot of fuel and fuel pressure when boost increases. Anyone have any experience with a setup like this. Also, I noticed extreme velocity has come out with a bonnet for a Dominator Carb. Has anyone used a dominator, wondering if it would be easier to tune. Any advisement is greatly appreciated want to aquire lot of information before I procede.
Jeff :D
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks