Results 1 to 3 of 3

Thread: 80mm Pro-M Q's

  1. #1
    Junior SCH Member
    Join Date
    Jan 2003
    Posts
    37

    80mm Pro-M Q's

    Hey guys I have a question. I have an 80mm Pro-M cal'd for 42's and a S/C. Appartently when I had my first chip done the tuner did not alter any of the MAF transfer functions. This caused me to have a horrible idle, stumbling and ultimately I believe the meltdown of my last motor. Another tuner here locally read the chip and confirmed that no transfer functions had been changed. What he told me was that I needed to get a transfer chart from Pro-M. So my questions are A) How do I get one from Pro-M?. B) What the hell are these guys talking about?. C) Do any of you have one that is the same setup i.e. 42's S/C etc? and finally does any of this make any sense at all? Thanks in advance.
    95 Zero option GTS. D.S.S 8.8-1 Bullet 306,S-Trim, Power Pipe, 6037's, TFS 2 cam, Perf RPM U/L, 70mm T/B, 80mm MAF, 42's, BBK L/T's.

  2. #2
    Senior SCH Member
    Join Date
    Jan 2003
    Posts
    110

    Re: 80mm Pro-M Q's

    Originally posted by BlownGTS
    Hey guys I have a question. I have an 80mm Pro-M cal'd for 42's and a S/C. Appartently when I had my first chip done the tuner did not alter any of the MAF transfer functions. This caused me to have a horrible idle, stumbling and ultimately I believe the meltdown of my last motor. Another tuner here locally read the chip and confirmed that no transfer functions had been changed. What he told me was that I needed to get a transfer chart from Pro-M. So my questions are A) How do I get one from Pro-M?. B) What the hell are these guys talking about?. C) Do any of you have one that is the same setup i.e. 42's S/C etc? and finally does any of this make any sense at all? Thanks in advance.
    are they referring to the flow chart? if you you can get one by giving them your serial number or using a generic one they have listed on their website


    d
    --
    93 GT

  3. #3
    Junior SCH Member
    Join Date
    Jan 2003
    Posts
    37
    Yeah the flow chart. I got mixed up. I'll try looking on the website, thnx.
    95 Zero option GTS. D.S.S 8.8-1 Bullet 306,S-Trim, Power Pipe, 6037's, TFS 2 cam, Perf RPM U/L, 70mm T/B, 80mm MAF, 42's, BBK L/T's.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •