As the thread title says.
I have paypal money ready right now.
As the thread title says.
I have paypal money ready right now.
Steve
1996 Acura Integra GSR
05 Pissat TDI
99 F250 PSD CC SB 6spd 4x4.....89LX Notch, 429Big Block(Rolling chassis).
Steve, I saw some guy selling new t-5 block plates on E-bay a while back.....
Let me see if I can locate you a link as they were pretty cheap....
Dart Block 331 and No Power Adder, currently in pieces...... :weird:Originally Posted by Kato Engineering
Used to run 6.90 @ 100.4 mph in the 1/8th
Dart Block 331 and No Power Adder, currently in pieces...... :weird:Originally Posted by Kato Engineering
Used to run 6.90 @ 100.4 mph in the 1/8th
Thanks for the heads up Sean. Looking into it.:)
Steve
1996 Acura Integra GSR
05 Pissat TDI
99 F250 PSD CC SB 6spd 4x4.....89LX Notch, 429Big Block(Rolling chassis).
No problem....
Dart Block 331 and No Power Adder, currently in pieces...... :weird:Originally Posted by Kato Engineering
Used to run 6.90 @ 100.4 mph in the 1/8th
Well boys I got everything but the wire harness. Seems it has even been discontinued from the dealer.
Steve, what's involved in the harness?? Will I need mine since I'm going to a C-4???
Dart Block 331 and No Power Adder, currently in pieces...... :weird:Originally Posted by Kato Engineering
Used to run 6.90 @ 100.4 mph in the 1/8th
I believe it runs the cruise cancel on the clutch pedal and also the neutral safety switch on the clutch so you have to start the car with the clutch in. It also plugs into the backup lights. As for needing it I guess that depends on how you wire you nuetral saftey switch to the shifter and how you wire the backup lights if you are going to.
My aod harness is wired to my B&M ratchet shifter.
Steve
1996 Acura Integra GSR
05 Pissat TDI
99 F250 PSD CC SB 6spd 4x4.....89LX Notch, 429Big Block(Rolling chassis).
Sean I just learned that the nuetral safety switch and cruise cancel wireing is in all the cars as it is part of the main harness. This will make stuff so much easier.:) Now all I need is a pig tail that goes to the back up light switch on the tremec.
Getting closer.
Lemme see what mine is, as I know I have no elec. plugs on my new trans. If I got what you need, you can have it.
Dart Block 331 and No Power Adder, currently in pieces...... :weird:Originally Posted by Kato Engineering
Used to run 6.90 @ 100.4 mph in the 1/8th
I couldn't dig anything up for you steve. If i had anything like that i prolly sold it to the guy who bought my t5 setup.
89 Coupe with parts stacked inside of it and about 30#'s of dust on it with no end in sight. :weird:
Although I am collecting parts for a 12.5:1 393 :D
Bookmarks