Page 4 of 6 FirstFirst ... 23456 LastLast
Results 46 to 60 of 79

Thread: Dyno Numbers

  1. #46
    Senior SCH Member frank woodall's Avatar
    Join Date
    Jan 2003
    Location
    B'Town, Fla
    Posts
    472
    Quote Originally Posted by brad87gt
    Congratulations man that is awesome. Hopefully i will be joining you in the 500 horse club as soon as this thing gets tuned. Did JMS get your chip right on the first tune?

    Well my car is a little lean......I just don't know if its the chip or the 36 # inj.
    But my car idles perfectly now with the chip.
    "The replacement for displacement is measured in P.S.I."
    91 Turbo GT Vert (fast)
    92 GMC Typhoon #1799
    00 Suzuki Katana
    90 LX Vert 5.0 (all stock 57,000mi)

  2. #47
    Junior SCH Member
    Join Date
    Jan 2003
    Posts
    18
    Quote Originally Posted by brad87gt
    Congratulations man that is awesome. Hopefully i will be joining you in the 500 horse club as soon as this thing gets tuned. Did JMS get your chip right on the first tune?

    I hAVE vic jr heads and vic 5.0 intake and TFS stage 3 cam and drag suspension and was wandering about putting on a novi 1000 would it be worth it, will this thing make bost with my heads?

  3. #48
    Senior SCH Member
    Join Date
    Dec 2003
    Posts
    127
    I was making 10 psi wth a f-150 crank pulley and a stock blower pulley with holley heads rhen i switched to victor jrs and the boost dropped to 7 psi so i put on a 2.75 inch blower pulley and the boost hits 12 psi at 6200 rpm. So yes it will make plenty of boost.

  4. #49
    Junior SCH Member
    Join Date
    Jan 2003
    Posts
    18
    I think Im gonna build my next motor supercharged with a NOVI 1000 and nitrous,,I hope the block doesnt break.

  5. #50
    Senior SCH Member
    Join Date
    Nov 2002
    Posts
    157
    I made 474 with my 306 and stock pulley. If I had a different pulley and my parts could take it. I'd guess I'd be 550+ but my next combo I plan on doing 550+rwhp with stock 6# pulley still :)

  6. #51
    SCH Moderator regattacoupe's Avatar
    Join Date
    Mar 2003
    Location
    Bucyrus oh
    Posts
    2,845
    Quote Originally Posted by KoolRockSteady
    I made 474 with my 306 and stock pulley. If I had a different pulley and my parts could take it. I'd guess I'd be 550+ but my next combo I plan on doing 550+rwhp with stock 6# pulley still :)
    Do tell! :D
    89 Coupe with parts stacked inside of it and about 30#'s of dust on it with no end in sight. :weird:





    Although I am collecting parts for a 12.5:1 393 :D

  7. #52
    Junior SCH Member
    Join Date
    Nov 2003
    Posts
    10
    Definetely do-able. I made 483rwhp, with
    only 14 degrees total timing and 91 octane.
    Stock exhaust manifolds.
    80mm Lightning MAF.
    It was also pushing a 4.56 gear which was hurting numbers for sure.
    99BlackCobraCoupe
    ------------------------------
    Novi 1000
    Paxton Intercooler
    Lots of crap
    No tune yet

  8. #53
    Junior SCH Member RED92GT's Avatar
    Join Date
    Mar 2004
    Posts
    49
    Quote Originally Posted by dgrobels
    I hAVE vic jr heads and vic 5.0 intake and TFS stage 3 cam and drag suspension and was wandering about putting on a novi 1000 would it be worth it, will this thing make bost with my heads?
    Hey there, you wouldn't happen to have any audio of your car would you? I'm thinking about that cam or possibly the stage 2 but i'd like to have a listen to it if possible. Would be greatly appreciated.

    Thanks in advance!
    :D

  9. #54
    Senior SCH Member
    Join Date
    Nov 2002
    Posts
    157
    I have video and audio of my car geting tuned on the dyno but noone to host it. I sent regatta by dyno sheet. Can you please post it here?

  10. #55
    Senior SCH Member
    Join Date
    Nov 2002
    Posts
    157
    Quote Originally Posted by 32VHEMIJR
    Definetely do-able. I made 483rwhp, with
    only 14 degrees total timing and 91 octane.
    Stock exhaust manifolds.
    80mm Lightning MAF.
    It was also pushing a 4.56 gear which was hurting numbers for sure.
    Cool. What pulley. I know people with 99 cobras with d1 intercooled making 10#'s boost only making 450! Good to see our little 1k's making good power

  11. #56
    Junior SCH Member
    Join Date
    Nov 2003
    Posts
    10
    Quote Originally Posted by KoolRockSteady
    Cool. What pulley. I know people with 99 cobras with d1 intercooled making 10#'s boost only making 450! Good to see our little 1k's making good power
    Dont know what the standard pulley size is, but I measured it to be 2.860 with my calipers. Has to be a little smaller to make up for the pressure loss caused by the intercooler.
    99BlackCobraCoupe
    ------------------------------
    Novi 1000
    Paxton Intercooler
    Lots of crap
    No tune yet

  12. #57
    SCH Moderator regattacoupe's Avatar
    Join Date
    Mar 2003
    Location
    Bucyrus oh
    Posts
    2,845
    as soon as i figure out how to edit it i'll be in good shape larry. LOL It's too big for the server to accept.
    89 Coupe with parts stacked inside of it and about 30#'s of dust on it with no end in sight. :weird:





    Although I am collecting parts for a 12.5:1 393 :D

  13. #58
    Junior SCH Member
    Join Date
    Feb 2004
    Posts
    26
    its very capable i made 503rwhp on a novi1k

  14. #59
    Senior SCH Member
    Join Date
    Dec 2003
    Posts
    127
    What is your combo?

  15. #60
    Junior SCH Member
    Join Date
    Feb 2004
    Posts
    26
    trick flow heads, trick flow stage 1 cam, holley system max ll- upper and lower intake, 42lbs injecters, 8" crank pulley, 12lbs of boost, t-3550 trans, 3:73 rear, novi 1k of course, morphius power pipe, 80mm mass air, 75 mm throttle body

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •