14lbs too much?

[89stalker]

I have an 89' gt vert with the following mods:
75mm pro flow mass air, cobra upper and lower, 24lb injectors, cam, msd ignition, tremec t5 and some other mods like bbk headers to flowmasters. I just recently bought a p600b with a 14 and a 17lbs pulley and wanted to know if 14 was too much for what i have. My car is an everyday driver and i asked the guy i bought it from said that the 14 is fine and that i should just get the mass air meter recal'd and get 36 or 42lb injectors and i would be fine. Please give me some of your opinions. Thanks for any help it is greatly appreciated.

[blownaway]

36's are too small for sure without an FMU, That is unless you want to buy mine!! :D

[89stalker]

I bought a complete kit with an fmu and everything.

[regattacoupe]

Honestly if you have a stock motor and 14 psi, as long as you have adquate fuel supply i think you'll be fine. 24's I doubt will do the job. Start the timing consevative and work your way up. Did you get the really nice ATI fmu with the bleeder valve on it??

[89stalker]

What size injectors do i need and where can i get the mam recal'd? Thanks

[JonnySmooth]

14 lb kit will be fine. Just make sure it is tuned right and you get enough fuel.
Its not the boost that kills a motor, its improrer tuning.

Good luck and have fun!

-Jon

[pablo]

I agree, 14 psi would be OK, the 24# injectors would be fine.
Just retard the initial timing about 4 degrees.
Are you using the 2 or 3 core intercooler???
I recomend you use the Intercooler, just to keep things safe.
Enjoy the boost!!!
Pablo

[89stalker]

I agree, 14 psi would be OK, the 24# injectors would be fine.
Just retard the initial timing about 4 degrees.
Are you using the 2 or 3 core intercooler???
I recomend you use the Intercooler, just to keep things safe.
Enjoy the boost!!!
Pablo

I am going to get 42lb injectors soon and try the new pro m blow thru meter. I have the 3 core intercooler.

[Crazyhorse88]

Good move! Be safe with the 42#s and if you ever want to do any more mods you are ready without having to upgrade! Pro-M now makes an ATI meter I just got it along with one of their custom chips I will let you know how it all goes together when I am done in a few days.

[89stalker]

Good move! Be safe with the 42#s and if you ever want to do any more mods you are ready without having to upgrade! Pro-M now makes an ATI meter I just got it along with one of their custom chips I will let you know how it all goes together when I am done in a few days.

Ok great i am gong to get the pro flow ati meter also. Let me know how it goes. Thanks

[Crazyhorse88]

The Meter is on sale right now for $188! + $15 for the pig tail. Good luck

[89stalker]

The Meter is on sale right now for $188! + $15 for the pig tail. Good luck

Where is that at? From pro flow?

[Crazyhorse88]

Yes Pro-flow 1-248-541-4780 ask for John tell him Frank From Port Jeff told you about the 3 inch meter for ATI superchargers.

[89stalker]

Do you guys think that i could run 14lb's with stock heads and 42 lb injectors with the 3 core intercooler? Thanks