Originally Posted by brad87gt
Well my car is a little lean......I just don't know if its the chip or the 36 # inj.
But my car idles perfectly now with the chip.
Originally Posted by brad87gt
Well my car is a little lean......I just don't know if its the chip or the 36 # inj.
But my car idles perfectly now with the chip.
"The replacement for displacement is measured in P.S.I."
91 Turbo GT Vert (fast)
92 GMC Typhoon #1799
00 Suzuki Katana
90 LX Vert 5.0 (all stock 57,000mi)
Originally Posted by brad87gt
I hAVE vic jr heads and vic 5.0 intake and TFS stage 3 cam and drag suspension and was wandering about putting on a novi 1000 would it be worth it, will this thing make bost with my heads?
I was making 10 psi wth a f-150 crank pulley and a stock blower pulley with holley heads rhen i switched to victor jrs and the boost dropped to 7 psi so i put on a 2.75 inch blower pulley and the boost hits 12 psi at 6200 rpm. So yes it will make plenty of boost.
I think Im gonna build my next motor supercharged with a NOVI 1000 and nitrous,,I hope the block doesnt break.
I made 474 with my 306 and stock pulley. If I had a different pulley and my parts could take it. I'd guess I'd be 550+ but my next combo I plan on doing 550+rwhp with stock 6# pulley still :)
Do tell! :DOriginally Posted by KoolRockSteady
89 Coupe with parts stacked inside of it and about 30#'s of dust on it with no end in sight. :weird:
Although I am collecting parts for a 12.5:1 393 :D
Definetely do-able. I made 483rwhp, with
only 14 degrees total timing and 91 octane.
Stock exhaust manifolds.
80mm Lightning MAF.
It was also pushing a 4.56 gear which was hurting numbers for sure.
99BlackCobraCoupe
------------------------------
Novi 1000
Paxton Intercooler
Lots of crap
No tune yet
Hey there, you wouldn't happen to have any audio of your car would you? I'm thinking about that cam or possibly the stage 2 but i'd like to have a listen to it if possible. Would be greatly appreciated.Originally Posted by dgrobels
Thanks in advance!
:D
I have video and audio of my car geting tuned on the dyno but noone to host it. I sent regatta by dyno sheet. Can you please post it here?
Cool. What pulley. I know people with 99 cobras with d1 intercooled making 10#'s boost only making 450! Good to see our little 1k's making good powerOriginally Posted by 32VHEMIJR
Dont know what the standard pulley size is, but I measured it to be 2.860 with my calipers. Has to be a little smaller to make up for the pressure loss caused by the intercooler.Originally Posted by KoolRockSteady
99BlackCobraCoupe
------------------------------
Novi 1000
Paxton Intercooler
Lots of crap
No tune yet
as soon as i figure out how to edit it i'll be in good shape larry. LOL It's too big for the server to accept.
89 Coupe with parts stacked inside of it and about 30#'s of dust on it with no end in sight. :weird:
Although I am collecting parts for a 12.5:1 393 :D
its very capable i made 503rwhp on a novi1k
What is your combo?
trick flow heads, trick flow stage 1 cam, holley system max ll- upper and lower intake, 42lbs injecters, 8" crank pulley, 12lbs of boost, t-3550 trans, 3:73 rear, novi 1k of course, morphius power pipe, 80mm mass air, 75 mm throttle body
Bookmarks