timing help with boost

[r0ck3r]

right now im running 11deg on the balancer, and i have a boost timing master, im wondering what i can set my timnig to on the balancer, and how much timing i should pull out on the boost timing master ... i was thinknig 10deg, and 1deg per lb on the btm

im hoping to boost about 10lbs, don't wanna go any higher since im pushing the hyperpathetic pistons :p

[speedytang]

I would set the balancer to 14 degrees and then 1 degree for 1psi and that will put you around 19-21 total degrees of timing at 10psi