Warning: preg_replace(): The /e modifier is deprecated, use preg_replace_callback instead in ..../includes/class_bbcode.php on line 2958
A-Trim and SC-Trim people, what kind of...
Results 1 to 11 of 11

Thread: A-Trim and SC-Trim people, what kind of...

  1. #1
    Senior SCH Member
    Join Date
    Dec 2002
    Posts
    102

    A-Trim and SC-Trim people, what kind of...

    ... Horsepower and Torque is your car producing with using an
    A-Trim or SC-Trim.

    Tell us your experiences, from how it overall effected your car and any likes or dislikes you might have about the a-trim or sc-trim.

    Was your car dyno'd/dyno tuned?

    Has it seen the track?
    If your a-trim or sc-trim car has seen the track, what are your 1/4 mile times, or 1/8 mile times?


    What are your goals with your a-trim'd or sc-trim'd vehicles?

    -Chris

    1991 Ford Mustang LX Sport 5.0
    Goliath
    (Novi 1000/Nitrous Works Powered)
    R.I.P. its been fun friend!


    1993 Ford Mustang SVT Cobra #4549
    No Name Yet...
    (Vortech S-Trim Powered!)

  2. #2
    Senior SCH Member
    Join Date
    Jan 2003
    Posts
    110
    stock motor and a-trim i made 297 rwhp / 313 rwtq, went 12.87 @ 107

    car was dyno tuned
    --
    93 GT

  3. #3
    Junior SCH Member
    Join Date
    Jan 2003
    Posts
    3
    302 Stock Short Block
    Twisted Wedge Heads
    E303 Cam
    GT-40 Intake
    A-Trim

    494rwhp

    10.94 @ 125mph (Summer 1997)

    It took a 2.5" 8-rib blower pulley to pull that off.

  4. #4
    Junior SCH Member
    Join Date
    Jan 2003
    Posts
    36
    I don't have any numbers yet, track or dyno. I'd eventually like to get about 400 rwhp with the SC-trim and H/C/I - without changing out the compressor pulley and voiding the warranty. Hopefully I can do that and still be able to pass CA smog emissions.
    '91 GT (Original Owner)
    SC-trim w/ bypass, TFS Street intake, 65 mm FMS TB, 7" crank pulley, Morpheus pipe, 30# FMS injectors, 255 GSS340 Walbro, 3.55's, 1 5/8 shorties, Magnaflow catback


  5. #5
    Junior SCH Member
    Join Date
    May 2004
    Posts
    1
    302 STOCK BLOCK FULL EXHAUST, ECAM, PERFORMER HEADS ALL BOX STOCK, COG KIT , GT40 MANIFOLD,70TM MADE 567RWHP

  6. #6
    Junior SCH Member
    Join Date
    Jun 2004
    Posts
    2
    I made 348hp/366tq at the wheels with my A-trim. That was using a 2.95 and either a 6.87 or 7" crank pulley, I'm not sure which.

    TFS intake, exhaust, C&L 76, 30 lbs. injectors and stock heads and cam.

  7. #7
    Junior SCH Member
    Join Date
    Mar 2004
    Location
    Toronto
    Posts
    49
    see sig..hehe..I made 7 psi with a 7 inch crank and 3 inch charger pulleys. Last week I put on a 2.8" charger pulley...seeing 9 psi at 4500rpm now!
    SOLD!!!! 442.3 rwhp 421.2 ftlbs @ 10 psi SAE
    87 Mustang GT
    306, 10-1 comp., B303, J&P ported 6037's, ported fake Ebrock intake, 65mm tb, 70mm egr, 3.73, 1.7 RR's, Pro-M 75 S/C calibration, 42lb injectors, B&M RIPPER, BBK LT's, RACE MAGNUMS w/offroad! and Pretty blue TAYLOR's!
    308.1 rwhp 327.6 rwtq -N/A

  8. #8
    Junior SCH Member
    Join Date
    Dec 2003
    Posts
    21
    10.66 @125 w/ an a-trim

  9. #9
    Junior SCH Member
    Join Date
    Mar 2004
    Location
    Toronto
    Posts
    49
    Quote Originally Posted by 87gtNOS
    see sig..hehe..I made 7 psi with a 7 inch crank and 3 inch charger pulleys. Last week I put on a 2.8" charger pulley...seeing 9 psi at 4500rpm now!
    Updated dyno tune in sig...hehe
    SOLD!!!! 442.3 rwhp 421.2 ftlbs @ 10 psi SAE
    87 Mustang GT
    306, 10-1 comp., B303, J&P ported 6037's, ported fake Ebrock intake, 65mm tb, 70mm egr, 3.73, 1.7 RR's, Pro-M 75 S/C calibration, 42lb injectors, B&M RIPPER, BBK LT's, RACE MAGNUMS w/offroad! and Pretty blue TAYLOR's!
    308.1 rwhp 327.6 rwtq -N/A

  10. #10
    Junior SCH Member blownholley50's Avatar
    Join Date
    Feb 2003
    Location
    Odessa,TX
    Posts
    21
    old setup ran 11.4 with a spinning 1.79 60 foot(4500 foot)-blew head gasket 3/4 down the track on that pass and have not been back since last june! I only did 435rwhp/535rwtq on pump gas with a c4 tranny. With the new computer etc... and once i get the car to hook it will be deep into the low/mid 10's. I had a tweecer the last pass i ran, couldnt ever get that thing to do anything for me! I love my lil a-trim- i was going to get a ys last year before i blew the gasket-after that i got pissed and gave up till this last month(hopefully it is running soon!)!
    1993 LX Mustang, A-Trimmed(6#'s), New full ArtCarr C4 setup, World Sr Cast Heads, F.A.S.T Computer, 72# injectors etc....

    Will Be The Fastest A-Trimmed Car, well maybe not??

  11. #11
    Junior SCH Member blownholley50's Avatar
    Join Date
    Feb 2003
    Location
    Odessa,TX
    Posts
    21
    Quote Originally Posted by RACERMO
    10:66@125
    what set up u got, how much boost u pushing from the a-trim, what 60 foot u get on that time, how much does the car weigh etc... thanks---any pics or videos?
    1993 LX Mustang, A-Trimmed(6#'s), New full ArtCarr C4 setup, World Sr Cast Heads, F.A.S.T Computer, 72# injectors etc....

    Will Be The Fastest A-Trimmed Car, well maybe not??

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •