Results 1 to 10 of 10

Thread: 351 w/YS- Trim

  1. #1
    Senior SCH Member Brcuda's Avatar
    Join Date
    Jan 2003
    Posts
    183

    351 w/YS- Trim

    Is anyone running or building a 351 or larger motor with a YS-Trim supercharger on it?
    393 stroker with YS-trim Vortech :-)

  2. #2
    we ran the same combo in renegade last year
    dale@swillracing

  3. #3
    Senior SCH Member Brcuda's Avatar
    Join Date
    Jan 2003
    Posts
    183

    Hmmm

    Tell me your et and mph. How much boost did you run and which tranny.
    393 stroker with YS-trim Vortech :-)

  4. #4
    Junior SCH Member
    Join Date
    Feb 2003
    Posts
    12

    Re: 351 w/YS- Trim

    Originally posted by Brcuda
    Is anyone running or building a 351 or larger motor with a YS-Trim supercharger on it?
    I am, hope to have it done by spring. Have an old sportmans 351 shortblock still in the crate (and hopefully better pistons) to drop in. Going ot hang the 302 on the wall, make a nice conversation piece... :D
    89 LX
    Stock ported heads with 1.84" & 1.54" valves
    Untouched GT-40 intake, Crane 2031, S-trim
    11.13 @ 127 3370lb
    500.3 RWHP

    86 SVO
    222 rwhp

    My Basic Blower Tech Site
    My Dynojet Resource Site

  5. #5
    Junior SCH Member Samfrus's Avatar
    Join Date
    Feb 2003
    Posts
    10
    9.27 148 @ 3300lbs. Around 25. Dynamic C4.

    Pat@swillracing.com

  6. #6
    Senior SCH Member Brcuda's Avatar
    Join Date
    Jan 2003
    Posts
    183

    Hmmm

    Originally posted by samfrus
    9.27 148 @ 3300lbs. Around 25. Dynamic C4.

    Pat@swillracing.com
    I have not made up my mind on weather I should go C-4 or AOD, car will see Saturday nite duty every now an then.
    393 stroker with YS-trim Vortech :-)

  7. #7
    Senior SCH Member
    Join Date
    Feb 2003
    Location
    Houston
    Posts
    189
    My buddy has a 393 YS-trim intercooled in his 94 Cobra.

    Troy
    1995 Mustang Cobra
    302-10.77 @ 127.76
    new motor being built
    redsnk@yahoo.com

    owner/moderator
    http://www.stangtuning.com

  8. #8
    Senior SCH Member Brcuda's Avatar
    Join Date
    Jan 2003
    Posts
    183
    I would like to see pics of his set-up, with the intercooler and all.
    393 stroker with YS-trim Vortech :-)

  9. #9
    Senior SCH Member
    Join Date
    Feb 2003
    Location
    Houston
    Posts
    189
    Well that I don't have access too. If I catch him at the track in about a month maybe I can snap a few. But I can give you a run down of how he has it routed.
    Passenger side mount YS-trim with a straight voulette, discharge tube goes into the fender down to the intercooler, and out on the driver's side fender to the throttle body. He uses a Hogan's manifold upper with the throttle body on the driver's side.

    Troy
    1995 Mustang Cobra
    302-10.77 @ 127.76
    new motor being built
    redsnk@yahoo.com

    owner/moderator
    http://www.stangtuning.com

  10. #10
    Senior SCH Member Brcuda's Avatar
    Join Date
    Jan 2003
    Posts
    183
    Sounds like a nice setup.
    393 stroker with YS-trim Vortech :-)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •