What kind of plugs do you guys run and what gaps do you find work best? Just trying to see what everyone else uses.:)
What kind of plugs do you guys run and what gaps do you find work best? Just trying to see what everyone else uses.:)
1998 GT
S-Trim
DSS Forged Short Block
PIs
Murillo Tuned
347hp 354ft/lb
NGKs, can't remember the part # off the top of my head, but they're 2 heat ranges cooler than stock. Gapped @ .32-.35
NGK TR6 or Autolite 764 gapped at .035"
Jerome
96 Cobra
Rebuilt Motor
Vortech S Trim with 3.12" pulley
Full Saleen Body Kit
Few other things...
SAE Corrected 510rwhp 446rwt
11.926 ET @119.88 mph 1.978 60FT
Autolite, whatever AFR heads recomended and then 1 heat range cooler. Gapped at 35
You Must Be Fast, Cause You Were Flyin When I Passed You!
Same.Originally posted by 5LVENOM
NGKs, can't remember the part # off the top of my head, but they're 2 heat ranges cooler than stock. Gapped @ .32-.35
NGK TR6's Gapped at .35
Razor.
2001 Cobra #719
MODS: Vortech S-Trim, Aftercooler, Mini Race Bypass Valve, AFM Power Pipe, 90m.m. LMAF, 42# Injectors, Superchips Chip, 03 Cobra Fuel Pump, Trunk Mount Battery, Auto Meter Gauges, Solid Axle Swap, 4:10 Gears, O/R H-Pipe, Mac Cat-Back, Flowpath Mufflers, Pro 5.0 Shifter, Mac Subframe Connectors, D/S Safety Loop, McLeod Clutch, Steeda Sport Springs, Moser 31 Spline Axles, Eaton Posi, Granatelli Upper & Lower Control Arms, AFS 2003 Chrome Cobra Wheels (17x9, 17x10.5), 315/35/17 Nitto DR's.
Dyno: 496 RWHP. & 422 RWT. (SAE Corrected)
MY WEBSITE: Click Here
ww.ModularFords.com -4V Forum Moderator
Same here. I'm thinking about going back to the 3924's and see how they work with the new motor.Originally posted by novipower
Autolite 3923 @ .35
Ian
93 LX
R331/AFR 205/Vic 5.0/? psi
Cool thanks guys. I use Autolite 3922s.
Trey
1998 GT
S-Trim
DSS Forged Short Block
PIs
Murillo Tuned
347hp 354ft/lb
Autolite AR3923
.35
--
93 GT
Bookmarks