Results 1 to 6 of 6

Thread: I need a BYPASS Valve For My SN-89 - Where to buy?!

  1. #1
    Junior SCH Member
    Join Date
    Jun 2004
    Posts
    10

    I need a BYPASS Valve For My SN-89 - Where to buy?!

    Hey guys i cant find a BYPASS Valve for my sn89 charger.. Does summit have it? Any websites that carry them?

    Thanks in advance

  2. #2

  3. #3
    SCH Moderator 5150 LX's Avatar
    Join Date
    Dec 2002
    Location
    Abilene, TX
    Posts
    4,098
    http://www.greedspeed.com/products/p...io%201.8T&cat=

    This one is just the valve but it'll save you a ton of cash, hose and fittings are cheap at local parts store.
    Quote Originally Posted by Kato Engineering
    you just like the metric system because when you talk about your organs length, a three digit number seems to you longer than a one digit number....
    Dart Block 331 and No Power Adder, currently in pieces...... :weird:

    Used to run 6.90 @ 100.4 mph in the 1/8th

  4. #4
    Junior SCH Member
    Join Date
    Jun 2004
    Posts
    10
    Quote Originally Posted by 5150 LX
    http://www.greedspeed.com/products/p...io%201.8T&cat=

    This one is just the valve but it'll save you a ton of cash, hose and fittings are cheap at local parts store.

    Thanks alot i just ordered that one its about $40 with UPS shipping..

    Do do you how to install this? I need instructions..There is a 3/8th inch hold drilled inside my inlet supercharger tube in the middle, maybe i can get some fittings and install this one there? Where the does tubes goto?

    Thanks
    David

  5. #5
    SCH Moderator "SN Guru" speedytang's Avatar
    Join Date
    Dec 2002
    Location
    Marengo, Ohio
    Posts
    2,028
    Goes from the discharge tube to the inlet hose before the supercharger but after the MAS.

  6. #6
    Junior SCH Member
    Join Date
    Jun 2004
    Posts
    10
    You have any pictures of it?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •