what did u have in mods heads.cam.intake.mass air throttlebody? injectors size? gears? thanks
what did u have in mods heads.cam.intake.mass air throttlebody? injectors size? gears? thanks
This was my setup. 7 psi of boost, 65mm TB, cobra intake, 73 C&L, 24lb injectors, 1.6 roller rockers, b cam, stock heads, stock pistons, stock crank. All bolt ons and 3.73 gears, stock T5. I got the car in the 11's for about $2200 installing everything myself.
Ever ran the supercharher just by it self stock motor? if so what times too.
Never ran it other than that combo....but now that I think about it, that was with 5 psi of boost, I never ran it after I switched pulley's because I was looking to get about 9lbs and never saw it so I bought the novi 1000.
ahh i see . my brother going to put a 3.75 pulley on his Sn-92 and just see how much it helps but just cant it get to hot. ill tell u guys what his run stock pulley when he gets the boost gaage on and with the 3.75 k thanks all bye
just got done putting 30#' injectors in it and C&L mass air meter with the same stock motor. no port work. never been reringed or bearings never. best we ran was a 12.21 @109 anyone else got any times with these ball drive blowers?
i stuck my sn92 on last weekend and have some crappy tubing. i haven't gotten a chance to tinker with it yet but last nite(07-07), i ran a 12.41 at 111.44 mph. before the sn92, i was running a 125 shot of juice and my best was a 12.63 at 110 mph. i thought that was pretty darn good for a convertible 5.0. especially with a bad clutch. i'll reply again next week after i fix my clutch and tune a little. hopefully i'll see a high 11. and i'm also gonna spray it with a 50 shot.
slovert
12.63 on 125 shot w/out sn-92 on slicks @ 110 mph
12.41 on sn-92 and slicks @ 111.44 mph
13.20 on motor with slicks
'89 5.0 convertible
stock lower end
sn-92
125 shot nos (not used with sc yet)
trickflow stage 3 cam
edelbrock heads
edelbrock performer intake
30# injectors
1 chambers
extender
other odd & end bs...
Bookmarks