FS- Pro-M 80 mm mass air meter and 77 lb/hr injectors from Johnson Motorsports. Ran 10.20s at 135 on a street/strip Mustang. Will not separate.
Thanks.
FS- Pro-M 80 mm mass air meter and 77 lb/hr injectors from Johnson Motorsports. Ran 10.20s at 135 on a street/strip Mustang. Will not separate.
Thanks.
what impeadance are the injectors?
Mike
Originally Posted by Fastan
Most likely low impedence, not sure if you can modify a 50lb injector to flow 77lb/hr. Typically anything above 55lb/hr is low impedence.
Actually, these are high impedence so you can use your stock computer or aftermarket. I want $450 for the matched set. You can call me at 804.730.6641 if you have further questions.
Thanks.
Fastan
Do you have any pics? Do you have the flow sheet from Pro-M??
Also, where are you located?
Dart Block 331 and No Power Adder, currently in pieces...... :weird:Originally Posted by Kato Engineering
Used to run 6.90 @ 100.4 mph in the 1/8th
5150LX,
E-mail sent.
Thx.
e-mailed ya back....
Dart Block 331 and No Power Adder, currently in pieces...... :weird:Originally Posted by Kato Engineering
Used to run 6.90 @ 100.4 mph in the 1/8th
Bookmarks