Results 1 to 6 of 6

Thread: Vortech v1

  1. #1
    Junior SCH Member
    Join Date
    Sep 2004
    Posts
    25

    Vortech v1

    Hey guys I got a vortech v1 5 psi of boost comes with the fmu set at 12:1 for 19 lbs injectors I now run 24's with tfs heas and holley systemax intake what size disc do I need now with the 24 lbs ????????

  2. #2
    Junior SCH Member
    Join Date
    Jan 2003
    Posts
    36
    8:1
    '91 GT (Original Owner)
    SC-trim w/ bypass, TFS Street intake, 65 mm FMS TB, 7" crank pulley, Morpheus pipe, 30# FMS injectors, 255 GSS340 Walbro, 3.55's, 1 5/8 shorties, Magnaflow catback


  3. #3
    Junior SCH Member
    Join Date
    Sep 2004
    Posts
    25
    Just spoke to vortech today they told me 10:1 ?????????????????

  4. #4
    Senior SCH Member
    Join Date
    Feb 2003
    Posts
    132
    you w/b so damn rich w/a 10:1 cal that it w/probably burn your eyes & a ton of lost power..Further an 8:1 cal,which is normal w/also b rich, but not as bad...they r purposely over fueled(detonation & cooling)..If u use a 10:1 i w/bet my x that u w/not get the A/F above 10.5:1 under boost contrary 2 Vortech's answer........Further, the disc size for 24's/10:1 is 2.47" & the 8:1 is 2.22"...
    Last edited by midnight; 10-14-2004 at 07:40 AM.

  5. #5
    Junior SCH Member
    Join Date
    Sep 2004
    Posts
    25
    So go with the 8:1 disc ??????????:)
    Last edited by Taube; 10-15-2004 at 04:04 AM.

  6. #6
    Junior SCH Member
    Join Date
    Aug 2003
    Location
    San Antonio
    Posts
    7
    Go 8:1 with the 24 #'ers...you'll be fine.
    I'm not speeding officer, I just look fast!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •