-
Junior SCH Member
Thanks,
It would really help. My email address is rob@rehobothproperties.com
Thanks again,
Rob Burton
-
Junior SCH Member
Indy,
Do you have a picture of your engine showing your belt routing?
Rob
-
Junior SCH Member
Not really but install manual here http://www.msdra.com/old/KB%20inst.htm has a pic of how to route.
-
Junior SCH Member
Thanks for the help......I have a unique configuration since I don't have an air pump or air conditioner. Mine will need to route around the crank, alternator, water pump and blower only.
-
Junior SCH Member
routing should still look the same minus the two acc.
Key is belt wrap. I'll try to get a close up pic.
-
Junior SCH Member
Indy,
How much total timing are you running with your setup?
-
Junior SCH Member
I've only had time to play with part throttle spark vs load with my tweecer. Wot vs Rpm has been left at stock as i have had no dyno time to datalog. So 26 deg is total timing with base set at 10.
The car has been in the air for a 1 1/2 months as am almost complete the three link rear suspension then puttting in the cobra brakes from my 88gt.
Plan to do some dyno runs sometime in the new year. Sorry i cant'd be of more help.
-
Junior SCH Member
That's what I needed to know...am going to start my build during the holidays....will keep you informed.
Rob
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks