Novi 2000 Belt Application Guide

[FoMoCo1]

6.87/3.00 uses a Mac Truck belt #88GB452P555 - 10 rib

[Blown302stng]

I need to know what belt for a 7" and 3.25" 10 rib paxton novi 2000?

If anyone has any ideas let me know.

Jeremy

[FoMoCo1]

it should be around 56.0 inches check your local parts store i believe they should have it...the oreilys and napa here did atleast

[Blown302stng]

Thanks for the reply..

You have any idea about part #.

I have a Napa here local, but there are probably going to want a part #.

Jeremy

[FoMoCo1]

not sure on the part number...just tell them you need it to be 10 ribs and 56 inches...they should be able to look it up somehow

[Blown302stng]

they dont make a belt that is 10 rib and 56.0, I found a 56.7 and that was about it, I think the one they had below it was like a 54?

Anyone have any clues?

Jeremy

[FullAuto]

I answered you on the corral, then I came to check here. I see you beat me to it.

FoMoCo1 and I live near each other and have been searching through all these different combinations for the past month for both our motors. I didn't think they made a 56.0". You may try to go outside of the idler pulley and lengthen it to around a 57.5". Napa has a huge selection of 10 ribs from 56.5" up. They have almost every 1/2". I was going to one of their warehouse stores that I have a friend who works at and buying about 10 at a time (at ~$15-19 each). I was originally trying to do a 8" crank pulley to not void my warranty, but that didn't work. Now I have both a 3.00" and 2.75" pulley.

Anyway... you'll lose contact area, but you may find one that works if you go to the outside of the idler pulley.

[93blkcoupe]

A tech at Paxton gave me the p/n for a Mack truck belt that is 55.5", 88gb449p555, might want to check it out, also the Volvo truck belt p/n for the same belt is 3895518.

[Blown302stng]

Man thanks for the reply I will check it out and see if I can find one of them and give it a try.

Jeremy

A tech at Paxton gave me the p/n for a Mack truck belt that is 55.5", 88gb449p555, might want to check it out, also the Volvo truck belt p/n for the same belt is 3895518.

[FoMoCo1]

6.87/3.00 uses a Mac Truck belt #88GB452P555 - 10 rib

.......

[Blown302stng]

Hey I am gettin ready to go get one of the Mac Turck Belts, I will keep everyone informed if it is going to work with the 7"/3.25" Pulley combo.

Jeremy

[FoMoCo1]

i doubt it will fit....the 55.5 fits pretty snug on my 3.00 pulley.....although i have been wrong before

[Blown302stng]

Well got some good news the 55.5" mack truck belt worked with the 7"/3.25" pulley. I did have to bump the motor over a few times to get it on, but it worked.

Jeremy

i doubt it will fit....the 55.5 fits pretty snug on my 3.00 pulley.....although i have been wrong before

[FoMoCo1]

cool...let us know how much boost the 3.25 makes

[Chad89GT]

I managed to squeeze a k080545 onto my Renegade setup with a 7 / 3.0 :)