Anyone using a Novi2000(fox body) with a 2 Core Rad and Taurus fan. I dont see any way this is gonna work. The fan motor is hitting the 10rib crack pulley. Any help would be appreciated
Anyone using a Novi2000(fox body) with a 2 Core Rad and Taurus fan. I dont see any way this is gonna work. The fan motor is hitting the 10rib crack pulley. Any help would be appreciated
1993 Mustang LX 5.0
Engine:
1993 Mustang LX 5.0
306
Paxton Novi2000 12psi
Trickflow Track Heat Heads
Trickflow Street Heat Intake
Trickflow Stage 2 cam
Scorpion 1:6 RR
70mm BBK TB
80mm Pro-M Shorty
PowerPipe
42# Injectors
BBK 1 3/4 Long tube
Flowmaster Catback
Crane HI-6/PS2 Coil
Every other Bolt on available
518 RWHP 478 FT-LBS Torque
Yea I had the same problem....I loved my Tarus fan it kicked azz....i dont have a Griffin but i have a slightly bigger than stock (3 core)...i had to buy a thinner fan from Summit....it was the biggest Cfm for a 15" i could find and it works but isn't as good as the Tarus fan i think the Tarus fan @high speed is ~4000 cfm i heard somewhere....good luck!....the Tarus fan has to go! sorry
Mike
www.mikeymustang.com
Originally Posted by tonyv
did u have a problem with the top rad inlet coming to close to the Novi pulley.I see no way to connect the upper rad hose without it touching the pulley.
1993 Mustang LX 5.0
Engine:
1993 Mustang LX 5.0
306
Paxton Novi2000 12psi
Trickflow Track Heat Heads
Trickflow Street Heat Intake
Trickflow Stage 2 cam
Scorpion 1:6 RR
70mm BBK TB
80mm Pro-M Shorty
PowerPipe
42# Injectors
BBK 1 3/4 Long tube
Flowmaster Catback
Crane HI-6/PS2 Coil
Every other Bolt on available
518 RWHP 478 FT-LBS Torque
did you get the upper bent hose pipe with your kit?.....its close but you can get it to work......if you need a pix i can send one
Mike
Originally Posted by tonyv
ya please send a pic. my email is tonyvlx@hotmail.com. thanks for your help
1993 Mustang LX 5.0
Engine:
1993 Mustang LX 5.0
306
Paxton Novi2000 12psi
Trickflow Track Heat Heads
Trickflow Street Heat Intake
Trickflow Stage 2 cam
Scorpion 1:6 RR
70mm BBK TB
80mm Pro-M Shorty
PowerPipe
42# Injectors
BBK 1 3/4 Long tube
Flowmaster Catback
Crane HI-6/PS2 Coil
Every other Bolt on available
518 RWHP 478 FT-LBS Torque
It was damn close on my single belt Novi 1000 set-up that I had..... Don't believe that there would be room with a dual belt set-up.
I have pics in my damn photopost but I can't get to the stupid things!!!
Dart Block 331 and No Power Adder, currently in pieces...... :weird:Originally Posted by Kato Engineering
Used to run 6.90 @ 100.4 mph in the 1/8th
Bookmarks