I need a measurement on a Novi 2000 for Fox body. Please!

[RoadW3@aol.com]

I am in desperate need of a measurement. I need to know what the distance between the back of the pulley and the front of the head unit is, the part right behind the pulley. When I bought my blower (used) the previous owner milled the back of the pulley down and used spacers in the front to make the belt alignment correct. I have a standard 7 inch crank pulley with 8 rib. I need to know the distance so I can make the correct spacers. I am trying to cut down on the belt dust and hopefully save a belt.

Thanks,
Eric

[RoadW3@aol.com]

All the Novi 2000's here and no one can take a little measurement for me. It will only take like 3 minutes, promise.

Thanks,
Eric

[Blu50Stang]

I would take a measurment, but my Novi 2000 has a 10 rib setup. Not sure if that would be the same measurment or not.

[RoadW3@aol.com]

Thanks for the offer. Would you mind taking a measurement and I can compair it to what I have.

Thanks,
Eric

[Blu50Stang]

1/4"