Pulley Change...What tools to use.

[fastrike1]

My friend is changing his pulley and needs to know what tools is necessary to replace the pulley?

[blownzoom440]

on what supercharger type?

[fastrike1]

He has a 03 Cobra w/Eaton S/C.

[blownzoom440]

from what i can find[not much] the pulley is splined and you use an impact on the bolt to loosen.you will need the torque specs to finnish.this is the pulley on the sc right?not the motor.

[fastrike1]

from what i can find[not much] the pulley is splined and you use an impact on the bolt to loosen.you will need the torque specs to finnish.this is the pulley on the sc right?not the motor.

Yes it is on the S/C. The new pulley has no splines in it. It has a tapered inside with no spline or keyway...

[blownzoom440]

http://www.eaton.com/NASApp/cs/Conte...=1007421144131# here is eatons site.go to superchargers aftermarket to find link.the phone is 269-789-2134, e-mail arniedunai@eaton.com

[fastrike1]

Thanks, I will go check it out.

I looked at the site. It looks like I will have to call them for the information I need. Can't find it on their site.