If that is in the driver side corner near the EEC test connector, that is also for the EEC tester.Originally Posted by BLOWNBY
If that is in the driver side corner near the EEC test connector, that is also for the EEC tester.Originally Posted by BLOWNBY
Chris
9.05@152 with a T-Trim on BFG Drag Radials
NMCA SR6381
how come i cant find that ac wot relay here?
http://www.veryuseful.com/mustang/te...1eecPinout.gif
Looks like they call it the WAC. Very bottom of the picture, pin 54.
Chris
9.05@152 with a T-Trim on BFG Drag Radials
NMCA SR6381
so it can be done away with then right? cause its part of a/c i dont run any of that anymore LOLOriginally Posted by RSNovi
on these little connectors i noticed there is 2 they are both for the eec testing codes correct?Originally Posted by RSNovi
If you don't run AC any more, then ditch it.
Just to be sure, it was located on the passenger side of the engine bay?
Chris
9.05@152 with a T-Trim on BFG Drag Radials
NMCA SR6381
yep it was right there about where your mass air meter was
Yeah, the two in the upper right of the diagram labeled Self Test Connector and Self Test Input. I have never ever used them and I removed them on my car.Originally Posted by adamf4i
Chris
9.05@152 with a T-Trim on BFG Drag Radials
NMCA SR6381
yeap, ditch it if you don't have AC.Originally Posted by adamf4i
Chris
9.05@152 with a T-Trim on BFG Drag Radials
NMCA SR6381
on the things that are labeled t,u,v,w you were saying thats all for egr or smog **** that can be thrown out the 2 box things that are mounted on the back side of the passenger strut tower is what i was talkin bout ?Originally Posted by BLOWNBY
Yeah that whole little concotion is gone. The two box thingies.
351 "stockshort block": -Vortech T-trim (21 psi), Trick Flow Heads, Lunati Cam, Weldon fuel system, Lentech AOD., 3.55 gears, 27" Hoosier QTP's, 3500# with me
-545 rwhp
-10.02 @ 135mph---Is 9.99 to much to ask?:freaks:
-1.42-- 60'
Originally Posted by regattacoupe
awesome that was actually i thougth a big chunk of crap just sitting there so good to know that i can do away with it LOL thx again both of youOriginally Posted by BLOWNBY
by the way were those diagrams i linked you too on that tech part of badass mustangs what you were lookin for?
anyone have a link or diagram for the start silenoid
93 Cobra #2161
MMFF feature July '01
New combo: Keith Craft 331 R-block, YSi, Brodix, Kooks, Reichard, Dynamic, Wolfe etc, etc...
Y3K Performance Parts
Kooks, Reichard, SDS Motorsports & Innovate LM-1 dealer.
Car info> http://93cobra.itgo.com
Hey Hotrod cobra, Nice!- Very nice!!
347 J trim, Kennedys custom cam, and water/meth injection, Electromotive GT DFI
www.momsracing.com
Bookmarks