Results 1 to 3 of 3

Thread: T trim for 383 Windsor

  1. #1
    Junior SCH Member
    Join Date
    Nov 2004
    Posts
    2

    T trim for 383 Windsor

    Would a T trim be a good choice on a 383/351W stroker?
    I am building a blow through carb 383. Would like to keep it very streetable, with a hp target of 600 - 650 or so.
    Would a T trim be a good choice? I have a line on a new drivers side unit local. (didnt know a T trim was made with a drivers side kit). Any thoughts?
    Thanks!

  2. #2
    Senior SCH Member Chuck's Avatar
    Join Date
    Oct 2002
    Location
    Canada
    Posts
    614
    For your horsepower goal I think it is a good choice. I have heard of driver side t trims but I havent seen one in person.
    1993 notch, 357W forged pistons 9.2-1 comp,Vortech S-trim 3" / 8" pullies, AFR 185 heads, Trick Flow R intake, Anderson B451 cam, PMAS 80mm, 06 PMS, 60# injectors, 3.55 gears and PA SC C4, Dual Walbro fuel system. Best ET 10.35 @ 135mph

  3. #3
    Junior SCH Member
    Join Date
    Nov 2004
    Posts
    2
    Thanks for the help.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •