I just went to the Dyno with my Holley upper and lower/10:1/ 327 all forged internals stock block/42lbs. inj./255 intank/T-REx Inline/AFR 185's/ 598 lift roller cam I cant remember all of the cam specs off the top of my head/P.M.S/S-Trim with a Power Pipe/ 6.78 crank and 3.0 blower pulley. I also have a Methanol Kit.(cause of the 10:1 compression) Without the Methanol I made 520 Rwhp and 500 rwtq at 4800 and ended up at 550 RWHP and 530 RQTQ at 5300. I mean the power is great and all but I cant use it with the stock block. I mean I can't shift at 5000 rpm with a 6300-6700 rpm cam not to mention my 3.73's gears and TKO 600. What should I do? My boost gauge is showing like around 15. I have never heard of anything making that much with 6.87 and 3.00. ( And yes I re-verified the pulley sizes) I guess I am going to put on a 3.33 Blower pulley and see what happens. Maby then I cant use the Meth and make aorund 550/550 at around 6200. I guess we will see. Any suggestions would be greatly appreciated.
Thanks!!!!!
Bookmarks