Hey guys this is my 1st post so hi to all and maybe I can get lucky here with a little help!
I built a 393 based 351, I am just a couple of weeks out now from getting this thing dynoed and I would like to try to have all my pulleys available at one time.
My goal for the car is to make around 700+ flywheel horse or to be able to run 9.80s or so in a 2900lb car.
The Novi is rated for a max impeller at 55000 I think. I am using a 7" crank 10 rib, I have a 3.5", 3.25", and a 3" blower pulley
by my math it equals these impeller speeds
3.5" = 46020 @6500
3.25" = 49560 @6500
3.0" = 53690 @6500
I know boost is relative to restriction and abilty of engine but I would just like to be close, rest of combo is below
393w comp 8.9 to 1
canfield heads 300 cfm @.6 INT .205 cfm @.55 EX
Super Vic efi, 90 mm throttle body
83lb inj
Hyd roller 230 @.05 .603 max lift int
250 @.05 .578 max lift ex
116 lobe center
Areomotive Eliminator kit
msd dig 6
Big Stuff 3 efi with 2 bar map
2" inch kooks headers
Think I have the correct pulleys to pull this off or I am going to need to search for an 8" crank pulley?
Thanks in advance
Chad
Bookmarks