90 linclon mark vii
engine
342, dart block,crower billet crank, olivier rods, je custom pistons 8to1 compression,cometic head gaskets,
heads
AFR 205 heads,60cc,75cc exhaust ports
valve train
crane roller 1.6 roller lifters,manely custom pushrods,
crower tie bar solid lifters
blower
ys trim vortech blower
custom 1/2 "blower bracket,10rib 3.3" blower , 7"crank pulley,
cog drive setup 85 tooth/74 tooth crank, 27/30 thooth blower,
anderson power pipe,vortech mondo blowoff valve, custom blower brace,
exhaust
bassani 1 3/4 shorties, 3"mac pro chamber, 3"pro dumps,
induction
holley system max intake,1"intake spacer, accufab 75 mm t -body,
Engine managment system
fast system bank to bank w/wideband o2,crane ingition hi 6 r box and coil,
msd pro billet distubitor.
cooling system
fulidine radiator,edelbrock water pump,ramchargers dual fan setup,
chassi
custom 6pt roll cage, wild rides battle boxes,mm panhard bar,
sub frame conn., tublar k frame, coil conversion from air ride,
hpm custom control lower arms,adjustable uppers, kyb adjustable
shocks front, bilstines in rear,adj.camber plates,
rear
8.8,welded axels tubes,axels braces,
moser 33"s, strange locker , 3.73 gearset
transmission
lentech strip terminator 3000 stall speed convertor non lockup
fuel system
areomotive fuel system,
custom sumped tank.
Bookmarks