does anyone know the specs of a d2r
does anyone know the specs of a d2r
I have the complete spec's at work and will post them up on Monday. Flow is 2800 CFM though.
D-2R ProCharged R302 331
1.393 60 ft.
5.868 @ 123.119 (1/8)
9.072 @ 156.953 (1/4)
3400 lbs (with me)
"ProCharger...not just blowing hot air"
Photos: http://www.cafords.com/images/john91coupe/hi-res/
Videos: http://www.cafords.com/mpg/john91coupe/
93 notch-s-trim@11 p.s.i.,twisted wedge,GT-40,comp,306-pump gas only-10.93@129.7 on bfg drag radials--10.64@127.5 on ET drags
548rwhp/502 rwtq
new 340" procharged combo in the works
you know, I just noticed they took the D2 off the chart. they must have stopped making it. sorry
93 notch-s-trim@11 p.s.i.,twisted wedge,GT-40,comp,306-pump gas only-10.93@129.7 on bfg drag radials--10.64@127.5 on ET drags
548rwhp/502 rwtq
new 340" procharged combo in the works
D2R
Volute diameter = 10.5"
Max Flow (cfm) = 2800
Inlet Hose Diameter = 4.5"
Inducer Diameter = 4.35"
Exducer Diameter = 7.2"
Outlet Hose Diameter = 3.5"
Outlet I.D. = 3.15"
Max Impeller RPM = 53,000
Internal Step-up = 4.44
Bookmarks