We all know you're sell the little Novi, what are you gonna replace it with?
We all know you're sell the little Novi, what are you gonna replace it with?
Dart Block 331 and No Power Adder, currently in pieces...... :weird:Originally Posted by Kato Engineering
Used to run 6.90 @ 100.4 mph in the 1/8th
My little NOVI will be replaced with its larger more powerful brother ;)
Very close to selling the 1K to a Corral member.
Ian
What ya doing for a block, what displacement? Just what are your goals, lol
Well I am going to leave my 306 for now:
Stock Block - 28OZ
Forged Crank - SCAT
H Beams - SCAT
Probe PRS blower pistons
AFR 165's 61CC
Trick Flow Stage 2 cam
Comp Pro Magnum rockers
Ported GT40 lower / Downs Boxed upper
70MM Accufab
42LB injectors
Complete fuel system
NOVI 2K @ 10LBS
At some point I would love to make a 408, but that will be years from now I think.
Ian
how are you liking the downs upper and gt-40 lower? friends got the same setup but i dont know if i ever get a novi to either get that setup or a systmax
Well I only just bought it...I used a Typhoon last year. I think it will work great!
Ian
Pretty similar to mine, kinda.
Novi 1000 (10-15#'s)
Stock Block, girdled 50 oz balance, zero decked, 30 over
Scat 331 cast crank
Scat H-beams
Probe dish pistons (~8.5:1)
TFS TW heads (mild port job, maybe)
TFS Stage II Cam
TFS Track Heat Intake (polished...Bling, bling)
70mm Accufab
42 #'s
80 mm Pro-M
1 3/4" LT's
3" Dr. Gas X-pipe
Some kinda muffler w/ turn downs
Need to still figure out what to do with the fuel system though can't spring for the full $1100 deal.
BTW- what do those inlines run that Jack has w/o the filter?
Dart Block 331 and No Power Adder, currently in pieces...... :weird:Originally Posted by Kato Engineering
Used to run 6.90 @ 100.4 mph in the 1/8th
Cool..nice combo ;)
I am using MAC 1 5/8 long tubes, cats, and cat-back. I ditched the mass air and am going to SDS.
I am not sure about Jack's pricing on those pumps. Drop him an e--mail info@musclemotors.com - Mention you are a NOVIPOWER member.
Ian
I'm looking at the Tweecer RT for my tuning, I'll drop Jack an e-mail.
You think I can get by on a Walbro 255 Hi-Pressure intake if the boost is held to around 8#'s?
Yeah I would think so, lots of guys push the 255 high pressure to over 500 HP.
Ian
Ian, I love my pms, I'm just starting to rub the surface with it. Do you think you'll be losing anything with the 1 5/8" lt's and 2 1/2 system? I'm thinking about upgrading my exhaust.
Brandon
Cool!!! I can put that off til I get a real block then
or are you just trying to make up for the lost torque from that box upper. ;)
Brandon
UNTCHBL: Do you know "Andrew" on Corral? He makes over 700 through 1 5/8 headers! I think I will be ok for now. If I get a nice block for my internals and can push the 2K to 15+ then I may go to 3".
LOL I am not worried about torque, with my trans and stall I do not think I will even feel it.
Ian
Bookmarks