Results 1 to 2 of 2

Thread: Bd-600 to Bd-11a head unit swap?

  1. #1
    Junior SCH Member
    Join Date
    Sep 2006
    Posts
    1

    Bd-600 to Bd-11a head unit swap?

    Hey guys,
    I'm a little new to the supercharger thing, so bear with me....
    I recently purchased a used P/D kit w/ the Bd-600 head unit, and due to some severe negligence from the former owner, the impeller has practically torn apart the inside of the housing from a hack-job rebuild gone wrong. Anyways, In lieu of rebuilding it, I have a friend with a recently rebuilt BD-11A head unit for sale at a very cheap price, so i'm just wondering...Are they at all a direct swap, as far as the size of the casing goes? If not, can anyone direct towards a shop that can help me with a new impeller? I've checked out a place called 928 motorsports, and the gentleman I spoke was very helpful, but basically said that if they impeller is shot, there's not much they can do for it. I'm told this is a hard find in general, since Powerdyne won't sell impellers to individual retailers/shops. I hope some, if not all, of this info is at all accurate, so please feel free to steer me in the right direction if it's not. Anyways, thanks in advance for the help.

  2. #2
    SCH Member
    Join Date
    Jun 2003
    Posts
    85
    It is a direct swap. Even the XB-1A is a direct swap. Sounds like that other one is TOAST!:(
    1993 Mustang LX
    Reef Blue, 5spd, too much to list!


    1993 Mustang GT SOLD :(
    Powerdyne BD-11A w/9lb pulley,AOD->T-5 swap, MAC 1 5/8 shorties, MAC ProChamber, MAC catback,Pro 5.0 shifter, stock 3.27's, SPEC Stage II,and all else stock!

    12.774@111.147 with a 1.90 60ft on Nittos and 3000 rpm launch :)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •