what is the best recorded 60 foot times for anyone using mickey thompson drag radials? i have 275 50's best to date is a 1.87
what is the best recorded 60 foot times for anyone using mickey thompson drag radials? i have 275 50's best to date is a 1.87
I seen a 1.52 but not sure of the suspension setup, but they had 275-50x15's
275/50/15 et street radials, stock style suspension (adj. uppers, southside lowers, moroso drag springs in back, airbag on pass. side) and have seen 1.48-1.51 off the foot brake >>
LX stang Vortech, C4, A/C, etc...
how do you get it to hook? leave real soft then get into it? i have stock uppers and southside lift bars and an air bag also cant really seem to 60 foot it ,i have adjustable rear shocks on it also . i have tried to get better weight transfer by moving the battery in the back and putting 70/30 and 4 cyl springs in the front. i have anywhere from 15 to 18 # in the tires, almost like driving on stock tires.we put about 3 degrees negative in the lift bars,so what else am i missing?
Because of cooling down a Drag Radial the best traction is your first hit.
I've seen 1.3x's Many can get 1.4x consistent!
I had consistent low 1.5x with much suspension & launch work needed
351 "stockshort block": -Vortech T-trim (21 psi), Trick Flow Heads, Lunati Cam, Weldon fuel system, Lentech AOD., 3.55 gears, 27" Hoosier QTP's, 3500# with me
-545 rwhp
-10.02 @ 135mph---Is 9.99 to much to ask?:freaks:
-1.42-- 60'
Originally Posted by regattacoupe
A guy that races at my track had some and got good 60fts with the 255/50 16" on stock Pony's. He has the Hoosiers now and gets 1.5 consistently. The suspension looks all stock on the car, I have pics. It has an AOD though so maybe that has alot to do with it. The best the car has been is a 9.89@142 I think. Pretty damn fast for a full weight LX coupe! Here is a pic of it...
I posted pics in Corral awhile ago. Not sure where he is getting all the power or how. Car has no gauges or anything on the interior. 100% sleeper. 2 1/2 full exhaust with a plain Dynomax catback that is quiet. It has a Vortech, not sure what model. It says V-1 on it.
This is at Napierville, QC and he also runs at SanAir, QC too.
Last edited by DSBLK93GT; 10-04-2006 at 11:02 AM.
1993 Mustang LX
Reef Blue, 5spd, too much to list!
1993 Mustang GT SOLD :(
Powerdyne BD-11A w/9lb pulley,AOD->T-5 swap, MAC 1 5/8 shorties, MAC ProChamber, MAC catback,Pro 5.0 shifter, stock 3.27's, SPEC Stage II,and all else stock!
12.774@111.147 with a 1.90 60ft on Nittos and 3000 rpm launch :)
I've had several 1.44-1.46s on 275/60 MTs
I have UPR lowers, BBK uppers,130 coilovers in the front, 90/10s
They are very dependant on track prep I have noticed.
My buddy went a 1.28 on a 325/50R15 MT DR. That was a s/c'd stang --- went 8.2X on that pass. He uses Team Z's suspension setup.
93 Notch/364 Dart 8.2/AOD-e/3.73
Novi 2000 with Cogs
i have been a best of 1.48 with the 275/60/15
ive been 1.31 60ft on BFG 325/50/15 DR and i have a customer who has been 1.28 on a BFG too... i have another customer who has been 1.33 on a MT 275/60 MT..
www.kurganmotorsports.com
WINNING races with AEM, PMS, FAST, and EPEC
N.M.R.A.
2004 EFI Renegade B.G. Champion
2005 EFI Renegade Bradenton Champion
2005 EFI Renegade Kansas City Champion
2005 EFI Renegade RT 66 Runner-Up
2006 Drag Radial Reynolds, GA Champion
2006 Drag Radial B.G. Champion
Email Bob@Kurganmotorsports.com or visit www.kurganmotorsports.com with your mustang needs!
Bookmarks