Warning: preg_replace(): The /e modifier is deprecated, use preg_replace_callback instead in ..../includes/class_bbcode.php on line 2958
What thermostat housing with renegade discharge tube
Results 1 to 8 of 8

Thread: What thermostat housing with renegade discharge tube

  1. #1
    SCH Member
    Join Date
    Mar 2003
    Posts
    62

    What thermostat housing with renegade discharge tube

    I have a Novi 2000 renegade project I am trying to finish up.I am running into a problem with the discharge tube.The way I have the tube running it is interferring with my thermostat housing.I am running the factory 90 deg. one.It looks as if a straight one would work awesome just can't find a factory style one.Anyone have this same problem that I am having.If so how did you fix it.Also anyone know where a straight thermo housing is available.Any help would be greatly appreciated.Thx Chip

  2. #2
    Senior SCH Member Chuck's Avatar
    Join Date
    Oct 2002
    Location
    Canada
    Posts
    614
    I got a factory style one on ebay for $5. I found them mostly there and I think Summit carries one aswell.
    1993 notch, 357W forged pistons 9.2-1 comp,Vortech S-trim 3" / 8" pullies, AFR 185 heads, Trick Flow R intake, Anderson B451 cam, PMAS 80mm, 06 PMS, 60# injectors, 3.55 gears and PA SC C4, Dual Walbro fuel system. Best ET 10.35 @ 135mph

  3. #3
    SCH Member
    Join Date
    Mar 2003
    Posts
    62

    re

    The one you bought off of e-bay is a straight outlet?Does it have the little heater nipple on it also.Thx Chip

  4. #4
    Senior SCH Member Chuck's Avatar
    Join Date
    Oct 2002
    Location
    Canada
    Posts
    614
    Yes it has the nipple. I think Summit sells one with the nipple aswell.

    Here is a link

    http://cgi.ebay.com/ebaymotors/CHROM...spagenameZWDVW
    1993 notch, 357W forged pistons 9.2-1 comp,Vortech S-trim 3" / 8" pullies, AFR 185 heads, Trick Flow R intake, Anderson B451 cam, PMAS 80mm, 06 PMS, 60# injectors, 3.55 gears and PA SC C4, Dual Walbro fuel system. Best ET 10.35 @ 135mph

  5. #5
    SCH Member
    Join Date
    Mar 2003
    Posts
    62

    re

    I knew they sold the 45 degree ones but I am not certain it will clear. I know for sure a straight one would.Do you have any pics of the one you have installed.Thx Chip

  6. #6
    Senior SCH Member Chuck's Avatar
    Join Date
    Oct 2002
    Location
    Canada
    Posts
    614
    Chip,

    I sent you an email with some pics.
    1993 notch, 357W forged pistons 9.2-1 comp,Vortech S-trim 3" / 8" pullies, AFR 185 heads, Trick Flow R intake, Anderson B451 cam, PMAS 80mm, 06 PMS, 60# injectors, 3.55 gears and PA SC C4, Dual Walbro fuel system. Best ET 10.35 @ 135mph

  7. #7
    Junior SCH Member
    Join Date
    Feb 2006
    Posts
    17
    I just ordered a 90 degree swivel style and will probably point it towards the passanger side of the car and do it that way.

    I have a 45 and a 90 and neither will work. The 45 could maybe work but would rub on the discharge tube big time.

  8. #8
    SCH Member
    Join Date
    Mar 2003
    Posts
    62

    re

    Thanks for the pics Chuck.I sent you an e-mail back.I bought a 45deg. today and it looks like it is going to work.It does touch the discharge but I did not think that will cause any problems.Her are a couple of pics of the results.




Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •