do any of you guys have some part numbers for 30mm cogs that you could post for reference? the reason i ask is because napa and advance auto sell them but having those guys find part numbers is very annoying.
do any of you guys have some part numbers for 30mm cogs that you could post for reference? the reason i ask is because napa and advance auto sell them but having those guys find part numbers is very annoying.
i'm not sure if you guys know but napa and advance auto suck for getting cog belts. for one they can never find the right part numbers and even when you give them the right numbers they may not be able to get it cause it's not in their system. and when they finally figure it out and can get it after few days of wasted time...well...the price is a joke. long story short i was able to get cog belts from a local industrial supply store for $25 and that's the price for a gates 1440 belt. i actually went with bando because they have a better selection and i was able to find the right belt for my 32/68 cog setup.
here are some bando part numbers if you guys have a hard time finding the right belt length as gates only carries a 1280 and 1440 length. and yes, i do know that they make a 1392 but it's a special order belt, meaning you have to buy a minimum of 10 belts (asp carries this belt for only $65, which is a great scam given that it's like a $30).
bando part numbers....
1304-8M-30H (163 teeth)
1360-8M-30H (170 teeth...this belt is perfect with my 32/68 setup)
1424-8M-30H (178 teeth)
1440-8M-30H (180 teeth)
hope this helps someone out as trying to find these damb things can be a major pain in the s.
pk
Im going to being changing to a 3" blower pulley this year and was wondering what size belt to use. Im running the renegade driverside kit with the 8" crank pulley. Anyone run this here?
3.5 blower/7.0 crank using Dayco polycog part #5100555 purchased from
Ryder Fleet. 10 rib serp belt $24.00
Novi 2000 using factory brackets, single tensioner on 93 Notch.
Last edited by Reefer; 09-25-2007 at 07:39 PM.
You guys need to help me out before I can post these part numbers. It makes a difference what style brackets you use, because the length between the cog pulleys also plays a role. So I need to know the application, as in the bracket type and what kind of car its on, whether it was custom or what. Thank you for the recent heads up though in places to acquire belts at reasonable rates. That will be great help.
Hustler!
Well, you can add for an 8" crank and stock 3.5" novi2k pulley i used a 58.5" gates belt. shoot i forgot the pn. okay it's k100579. good luck. i'll let you know which belt i use for a smaller blower pulley when the time comes. Maybe this is already on here but I never saw it. Good luck!
93 black gt
I have a few brand new Dayco belts that I would sell if anyone is interested.
5080560 for an 8 rib 56.0" belt
$20 shipped
Chris
9.05@152 with a T-Trim on BFG Drag Radials
NMCA SR6381
Posting Permissions
Reply With Quote
Bookmarks