Here is the combo
393 sbf
Canfield heads 300/200 cfm at .600 lift
232 @.050 int, 249 @.050 ex, .603 int/ .578 ex, 116 c/l hyd roller
Super Vic EFI, 90mm tbody,
8.9 compression
BS3 EFI
Novi2k 7"crank. 3" blower pulley, 3" tubing ran into inter cooler and out to engine, this intercooler http://cgi.ebay.com/ebaymotors/Water...spagenameZWDVW
On the dyno the car only made 475 to the wheels, they would start the run from about 4500, at that point it would only make 6psi thew the 6500 redline. I have yet to check what the psi is before the intercooler but it seems as if the intercooler is resrticting it. With the 7" crank and 3" blower pulley i figured I would be closer to 12 or so lbs of boost, not 6. Weird gow the boost would flatline and not increase with rpm.
Anyone ever run into something similar?
Bookmarks