Power Pipe for an 01 Cobra

[01BLKCOBRA]

I have a PSC1 with an 8lb pulley on my 2001 Cobra. Does anyone make a Power Pipe for this set up? The stock intake pipe looks restrictive, plus I would like to get the air filter into the fender. I know this will take some trimming, but it should be well worth it. I though about trying Anderson's pipe they make for the Vortech, but I don't want to spend the money if it won't work. Let me know what you think.

[99CobraP1SC]

I am 80% into a "hack" job because I could not find a PowePipe for our setups (99 or 01 should be the same). Has been a PITA.

But, I just got this response today from someone on this forum. I don't know anything about the product or quality. But give this a look and maybe a call. Here is the link. This is for our setups!!!

http://www.wmsracing.com/wmsweb/tubes.htm

Good Luck, BRO!!

See my before and afters picks of the power pipe in the GEN CHAT section. You are making the right move, I am hoping to get 2-3 PSI with the power pipe and hopefully 50 RWHPs. The current setup is like a small straw attached to this power sucking machine.


John

[01BLKCOBRA]

That's perfect! I have been on their website before and I knew they made a lot of NA stuff. I've heard good things about their products, so I will give them a try if it's not too much $$. I'm currently putting forged internals in my motor so it would be a good time to do this as well. Thanks for your help.

[99CobraP1SC]

If you do it let me know how it works out and how much it costs. Good luck with your mods!!

I will post my DYNO numbers once the filter arrives. What I have is an Anderson Power Pipe that is "tailored" to fit on the P-1SC, not the best route so I would not recommend, but I am too far to switch back now.I wish I had seen this WMS power pipe before I started. Well at least you got the word!! Good luck again....

John

[lethrneck]

I've ordered the WMS pipe, it's $249.

Robert

[lethrneck]

I have the WMS and picked up 2-3lbs

Robert