Hi all,
I'd like to hear some ideas of how everyone got a power pipe to work with their p1 or d1 series blowers, and what materials you used, and where purchased.
Currently I am using a 4" flex hose routed from the back of the d1sc, through a hole cut in the fenderwell, and tubing ran through the fenderwell where my stock filter resides. Here is a picture of the piping used http://www.mcmaster.com/catalog/109/.../53145kp1l.gif
which is part number 53145k67. So far the tubing seems to work decent, and can make a very sharp bend without losing ID or OD due to the spiral wiring inside.
However I don't believe I have noticed a boost gain ( not that I need it ) by relocating the filter in the fenderwell.
I wouldn't mind seeing more boost down low in the rpm range with a better power pipe, and just installing a 6000rpm pill in my MSD to limit my total boost.
Anyone out there make their own power pipe? Pics?
Dan
Bookmarks