Results 1 to 2 of 2

Thread: Setting up a BOV?

  1. #1
    Junior SCH Member
    Join Date
    May 2011
    Posts
    17

    Setting up a BOV?

    Put an intercooler system on for my vortech s-trim. I have a question about the bOV. I know one small port is vacuum/bost control to open/close the valve, and the large port goes to vortech intake after the maf. but my Bov has a second small port that comes out bellow the diaphragm, where should that go?

  2. #2
    Junior SCH Member
    Join Date
    May 2011
    Posts
    17
    I found out that the smaller port is a vent for the diaphragm. And needs to stay open. I also converted the system to a Blow thru system. Mounted MAF after the intercooler and the BOV after the vortech and just vents to the atmosphere. Solved all my problems of compressor surge and deceleration fluttering.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •