i would like to use a ati m1sc (boat blower) on a 418ci sbf engine,tech at ati set me up with a renegade 12 rib bracket for my 90gt,i am very new at this and need some input,to help me along the way,i do have a few different pullies for this setup.
418ci sbf
9.1 comp
afr205 heads
vic jr/elbow(efi)
75mm t/b
60lb inj. ba 2600 mass air meter
hooker 1 3/4 long tubes
3 core air to air
want to be in the 500 plus rwhp range,any info would be appreciated
http://www.procharger.com/pdf/PC_Marine.pdf
how much boost are you looking to develop ?
any idea of your NA-horsepower??
that m1sc can produce 1400-cfm,
if you don't make 500+rwhp your engine is broken...
na should be around 450ish,hoping for around 10lbs,kicking around the idea of going without the cooler .
howmuch boost do you thinnk is ok b cooler is needed
With a 1400cfm flow rate, when you start seeing boost in the 8psi-10psi range, then an intercooler becomes a serious consideration; above 12psi and it's almost a must.Originally Posted by tonyt
Michael
www.superchargerhelp.com
Posting Permissions
Reply With Quote
Bookmarks