timing for sn93

[shopo27]

Is there a basic total degrees of timing to start with. 20 - 22 or higher?

[vinces427bb]

what is your set-up???
engine?
FI or carb??
what fuel?

[shopo27]

306, edelbrock performer rpm intake and heads, 70mm t/body,24lb. injectors, fmu (size?) 76mm maf, base timing at 10 deg. boost timer module set at 2 deg per 1 lb. boost, 92 octang fuel. 6' and 4.25' pulleys

[vinces427bb]

http://superchargerhelp.com/search.php?searchid=66642

this should get you headed in the correct direction :)

[shopo27]

link no open.........

[64wagon]

I dynoed a 347 and finished with 28 deg. total timing. i've alum heads

[vinces427bb]

i did a search for
"306+timing"
there were many threads on this :)

[shopo27]

Thank you very much