-
Junior SCH Member
SN 93 Impeller Spacing
Hi guys, I have a SN 93 that we rebuilt over summer. While recently at the tuners it wasn't making any boost but the impeller was spinning. After taking it apart again the backside of the impeller was contacting the housing. There is about .002 in. for space between the two and we are thinking that when the super charger heats up there is enough expansion to allow contact. Is there a spec for how much space is supposed to be behind the back of the impeller and the housing?
Thanks
-
Junior SCH Member
take the back housing cover lay it down on a flat table and drop your impeler in. then lay a strat edge across the back of the housing and measure the space from the strat edge to the impeler. now take this measurement and subtract .014" this sum should be your spacing between the main pump and the impeller.
-
Junior SCH Member
Thanks bromigo, is there somewhere that has this sort of information compiled or is that measurement something you just found that works by messing with these things?
-
Junior SCH Member
yes, here read 12 years worth of threads. LOL I talked to Craig with Paradise Wheels last month and and he walked me throuth it.
-
Junior SCH Member
LOL, I have mine set with .021" on the backside of the impeller and .015" on the intake side, i measured only .006" on the backside the way it was before, no wonder it wasn't working right
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks