Results 1 to 7 of 7

Thread: B&M 144 Fuel

  1. #1
    Junior SCH Member
    Join Date
    Jan 2012
    Posts
    3

    B&M 144 Fuel

    I have a B&M 144 on a 1993 Chevy Truck with a 350. What was the fuel pump for the supercharger rated at GPM. I need to know where I can get another one for my truck just incase this one goes out.

  2. #2
    Senior SCH Member vinces427bb's Avatar
    Join Date
    Jul 2011
    Location
    Los Lunas, NM
    Posts
    222
    are you using the factory style fuel pump in the fuel tank??
    are you running the B&M 144 with fuel injection? [which type]?
    did you change to a carb'ed set-up ??

  3. #3
    Junior SCH Member
    Join Date
    Jan 2012
    Posts
    3
    Using factory style in tank fuel pump that B&M sent with the kit, Im using the stock TBI setup.

  4. #4
    Senior SCH Member vinces427bb's Avatar
    Join Date
    Jul 2011
    Location
    Los Lunas, NM
    Posts
    222
    Quote Originally Posted by sdc3000 View Post
    Using factory style in tank fuel pump that B&M sent with the kit, Im using the stock TBI setup.
    I would contact B&M / Holley I think for their model # info...
    that will be best

  5. #5
    Junior SCH Member
    Join Date
    Apr 2014
    Posts
    2
    not to thread jack or anything but i am having the same issue sort of I installed a in tank efi pump for a vortec 5.7 and i dont think its enough you can tell it wants to make power but bogs out when I get to around 5 to 7 psi of boost also did your kit come with a chip for the ecm I think mine is bad does anyone know where i can get a new one? oh ya its on a 1992 chevy k1500 4x4

  6. #6
    Senior SCH Member vinces427bb's Avatar
    Join Date
    Jul 2011
    Location
    Los Lunas, NM
    Posts
    222
    Quote Originally Posted by laddiepowell View Post
    not to thread jack or anything but i am having the same issue sort of I installed a in tank efi pump for a vortec 5.7 and i dont think its enough you can tell it wants to make power but bogs out when I get to around 5 to 7 psi of boost also did your kit come with a chip for the ecm I think mine is bad does anyone know where i can get a new one? oh ya its on a 1992 chevy k1500 4x4
    are you asking about the FMU -fuel managment unit or the ECU - electronic control/computer unit?
    you will have to contact the supercharger manufacturer for this type of troubleshooting about their kits.
    there may be a forum on the manufacturers site that deals with others having the same issues.
    worth a check as they may have already solved your issues

  7. #7
    Junior SCH Member
    Join Date
    Apr 2014
    Posts
    2
    thanks for the reply it came with a fmu and a chip for the ecm the only thing i did not get was the fuel pump hopefully sdc3000 will have some luck on a pump # I played with the timing today small improvement but it still runs out of fuel ( I think) the in tank pump i have now is a Delphi feo114

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •