does anyone have a picture of their location of the hole drilled? did you enlarge the hole that is there, or have to move the location back somewhat? i am ready to get this done, so any help in the form of pics or replies is appreciated!
does anyone have a picture of their location of the hole drilled? did you enlarge the hole that is there, or have to move the location back somewhat? i am ready to get this done, so any help in the form of pics or replies is appreciated!
Neil
Engine: DSS Pro Bullet 306, Windsor Jr. heads, E303, 42lb inj., Cobra intake(fully ported lower)65mm TB, 80mm Mass Air, MSD 6BTM, MSD coil
Power Adder: Novi 1K, Anderson PowerPipe, ASP 8 IN Crank. No PS, AC, SMOG.
HP: 488.3
TQ: 461.7 Tuned by FordChip.com
11.77 @ 119.9
Best 60ft-1.56
New project 1991 coupe
NEW TOY 1995 H/D Sportster
This is a pic of the power pipe on my Novi2K. Yours will go in the same position. I used a dremel tool with a cutoff wheel and it worked great. Just take your time. I lined the hole with some generic window trim I bought at Pep Boys.
Doug
14-1 compression 402ci with a little nitrous
WOW, I didn't know those cutoff wheels were that strong. I have about 25 left for my dremel. I'm gonna have to look into a powerpipe.
even though the novi 1000 sits back a little more the location is the same?
YepOriginally posted by lx-convertible
even though the novi 1000 sits back a little more the location is the same?
I stole dawgsgt's pic from the photopost to show you the hole. It's the hole with the black cover on in this pic. All you have to do is enlarge that hole.
Doug
14-1 compression 402ci with a little nitrous
dugscpe
You stole something so personal and special to me,I just feel so violate and cheap(LOL). I was reading the post and said to myself damn i don't remember attaching an image to this post. Nice picture of a hole though. I Should have my Horsepower pipe from Harold at Morpheus Performance by Tuesday.
Later,
Dawg
cut the hole. had fittiment issues with the 90' elbow in the anderson kit. with the novi sitting so far back it wouldn't line up. had to trim 1 inch off the elbow, and now have sucess. didn't get it all back together yet, but almost done. looks good. i will snap a pic when i get a chance.
Bookmarks