I need to replace my stock radiator as it has a small leak & was thinking of going with an aluminium one.
Which brand do you all recomend ??
My car is a 93 coupe with a 347 & novi 2k.
Thanks in advance for any help.
I need to replace my stock radiator as it has a small leak & was thinking of going with an aluminium one.
Which brand do you all recomend ??
My car is a 93 coupe with a 347 & novi 2k.
Thanks in advance for any help.
Hey 93coupe!
I am also going to an aluminum rad - I am 90% sure I will be going with a nice Granatelli unit.
You can see the info here: http://www.granatellimotorsports.com...mradiators.htm
Ian
fluidyne
93 cobra#256 witha noisy alternator
Ron Davis Radiators. Check them out http://www.rondavisradiators.com/Welcome.htm
Look at this!!
I dropped them an e-mail to see how much :D
Ian
Ron Davis or a FRPP would be my choice.
Originally posted by 93 red snake
fluidyne
My FRPP didn't last a year. I know awhile back folks were having problems with their Fluidynes, but those issues have been resolved. I've run my FD for 2 years now with zero problem.
Click here to see my Notch
Engine mods:
Paxton Supercharger, TFS Twisted Wedge heads, 75 h.p. NOS, Typhoon intake, 80mm ProM, 30# injectors, Aeromotive fuel rails and FPR, Anderson PowerPipe, Edelbrock 70mm T/B and EGR spacer, BBK 255 lph in-tank pump, MSD 6A, Billet distributor, Blaster coil and BTM, Fluidyne radiator, Stewart water pump, FMS Police Interceptor fan and clutch, BBK Ceramic shorties with Stage 8 locks, Catco high-flow cats, Flowmaster American Thunder cat-back.
Chassis:
FMS front lower control arms, BBK upper and lower rear control arms, BBK progressive rate lowering springs , BBK subs, Steeda G-trac bar, Kenne Brown strut tower brace, Steeda caster/camber plates, AFS Cobra wheels, Koni 5 way adjustable Reds, SSBC rear disc brake conversion, FMS 73mm front disc upgrade, Maximum Motorsport stainless brake lines.
Drivetrain:
FMS 3.73 gear, TA rearend girdle, FMS aluminum driveshaft, Lentech Street Terminator valvebody, B&M Hammer shifter, Trick Flow high capacity aluminum AOD pan.
Interior/Exterior:
Cervini Mach 1 hood, Saleen body kit and rear wing, Cobra grille insert, Cerullo seats.
I run a Fliudyne as well. Haven't had any problems what so ever.
~Dan
2001 SVT Lightning: Flowmaster exhaust and mystery traction bars
89' GT : Waiting for a buyer
I've run a granatelli unit for awhile with no problems.
Bookmarks