Results 1 to 5 of 5

Thread: new Vortech bracketry...

  1. #1
    Junior SCH Member
    Join Date
    Jan 2003
    Posts
    16

    new Vortech bracketry...

    Just got the new Vortech bracketry for the drivers side YS-trim. This is a sweet set-up!! Very nice finish, great fit. If you go to this bracketry you may have to go to a shorter s/c drive belt. Looks like I'll need to go from a 8-rib 56" to a 55" or shorter.

    Later,
    Bk meyers
    Meyers & Meyers Racing
    NMRA Renegade #10

  2. #2
    Senior SCH Member Brcuda's Avatar
    Join Date
    Jan 2003
    Posts
    183

    Hmmm

    What is the dif between the standard bracket and the new?
    393 stroker with YS-trim Vortech :-)

  3. #3
    Junior SCH Member
    Join Date
    Jan 2003
    Posts
    16

    new bracketry...

    The standard bracket is just the one piece approx. 3/8" thick. The new bracketry uses a thicker main bracket plus an additional front brace and revised belt tensioner, somewhat like the Novi 2000 bracketry.

    Later,
    BK Meyers
    Meyers & Meyers Racing
    NMRA Renegade #10

  4. #4
    Senior SCH Member Brcuda's Avatar
    Join Date
    Jan 2003
    Posts
    183

    Interesting

    Where could I see a picture of this bracket?
    393 stroker with YS-trim Vortech :-)

  5. #5
    Junior SCH Member
    Join Date
    Jan 2003
    Posts
    16

    picture...

    I think one of the magazines had a small shot of it a month or so ago. I would try to send you one but I am not very computer adept.

    You could check on the Swill board (www.stangcrazy.com, then got to forums, then to the Swill Renegade board). They have the new brackets also and may already have a photo available.

    Later,
    BK Meyers
    Meyers & Meyers Racing
    NMRA Renegade #10

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •