I went to a car show yesterday. This was the second time out with the car since the Novi 2k install. At the same time I installed the Novi, I installed a Holley Systemax II intake manifold. Long story short: under boost, the PCV vavle jumps out of the lower intake manifold. What can be done to remedy this. And does anyone know where to get the little basket that sits under the PCV valve? I have a good feeling mine is on the freeway right now.
-Ross
88 GT - Novi'd 302
98 Cobra - N/A 281
Originally Posted by Doug
first of all you don't need the screen at all. 2nd. is the hose that goes into you're passenger side valve cover filler neck still connected to you're throttle body ? if it is thats the cause. plug it off at the t-body
Will do
-Ross
88 GT - Novi'd 302
98 Cobra - N/A 281
Do you run a breather in your valve cover?
Ian
Originally posted by novipower
Do you run a breather in your valve cover?
Ian
You can't run a breather in california...so the only thing I can use is the one that came with the novi.
-Ross
88 GT - Novi'd 302
98 Cobra - N/A 281
You cannot run a breather anywhere :p 93notch just passed our e-test with it installed!
Ian
yes i run a stock replacement screw in style K&N breather . not sure about California emiss. laws . i live in Fla where there is no emission tests at all......:D :D :D
blu50stang, do yourself a favor and get a breather. I just put my stock cap back on for emissions testing.
if you had to, couldnt you route that tube into the unperssurized intake tract (ie before the blower) to pass emmisions?
I am geeting ready to install a novi 1K. Do I need to unhook the tube from the valve cover to the throttle body? If so, where should I route it to?
you plug it off at the throttle body with a rubber plug and then when you install the kit it will tell you to run a 3/8 rubber hose from the valve cover filler neck port TO the brass fitting on the air filter cover that will come with the novi kit .
What if I don't run the air filter cover? I am running a AFM powerpipe. Where woudl I route to them?
typing to fast
it really does not matter if you use it or not.......all the hose is for is for emmisions......it pulls crankcase fumes out......it kind of helps the PCV valve
go to novi 1000 , then go to page 2 , then go to 'chrome discharge pipe'.....i have some pics there you can see
Posting Permissions
Reply With Quote
Bookmarks