Does the D1 use the same blower bracket as the P1-SC and D1-SC?
Does the D1 use the same blower bracket as the P1-SC and D1-SC?
The bracket for the "SC" blowers is different that the bracket for the oil fed D1 blowers.
Chris
the SC brackets also have an additional idler pulley on them for better belt wrap. The D1 head unit is clocked slightly different from a D1SC, that I can attest. ( on 94-95 cars )Originally posted by Injected65
The bracket for the "SC" blowers is different that the bracket for the oil fed D1 blowers.
Chris
Dan
1995 Rio Red Cobra #2021
Dart 331,AFR185,D1SC,RPMII upper/lower
OLD
GT40X, E303, D1SC 13psi, 3 core intercooler, Magnaflow Catback, Hooker equal lengths, Mac Prochamber, 3.73, Auburn, Moser 31 splines, Pro-m75, MSD 6AL, TKO, Spec Stage III, Larocca Tuned
10psi 11:1 a/f= 464rwhp 431ft/lbs
11.9@123mph @13psi 1.9 60'
hp? tq?
Moderator of General Tech
I'm looking at getting some modified brackets that came with a D1 kit that should allow me to run the car without a/c. From what you guys are saying, if I buy these brackets, I'm pretty much stuck with a D1. Is this a decent head unit? Is it too much for a mild street motor? Is it possible to buy just the bracket for the headunit, and still use the main bracket from the D1 kit?
Its fine for a mild street motor, I had mine only making 9-10#'s. Its a good head unit, I'd go w/ the D1 over the D1SC if I had to do it over.Originally posted by po-po 5.0
I'm looking at getting some modified brackets that came with a D1 kit that should allow me to run the car without a/c. From what you guys are saying, if I buy these brackets, I'm pretty much stuck with a D1. Is this a decent head unit? Is it too much for a mild street motor?
As far as purchasing just the bracket, Im sure you could, Id call ATI
DAN
1995 Rio Red Cobra #2021
Dart 331,AFR185,D1SC,RPMII upper/lower
OLD
GT40X, E303, D1SC 13psi, 3 core intercooler, Magnaflow Catback, Hooker equal lengths, Mac Prochamber, 3.73, Auburn, Moser 31 splines, Pro-m75, MSD 6AL, TKO, Spec Stage III, Larocca Tuned
10psi 11:1 a/f= 464rwhp 431ft/lbs
11.9@123mph @13psi 1.9 60'
hp? tq?
Moderator of General Tech
For what reason would you choose the D1 over the D1-SC is it because of the step-up or because the SC ones are prone to leakage?Originally posted by paluka21
Its fine for a mild street motor, I had mine only making 9-10#'s. Its a good head unit, I'd go w/ the D1 over the D1SC if I had to do it over.
DAN
BothOriginally posted by po-po 5.0
For what reason would you choose the D1 over the D1-SC is it because of the step-up or because the SC ones are prone to leakage?
Dan
1995 Rio Red Cobra #2021
Dart 331,AFR185,D1SC,RPMII upper/lower
OLD
GT40X, E303, D1SC 13psi, 3 core intercooler, Magnaflow Catback, Hooker equal lengths, Mac Prochamber, 3.73, Auburn, Moser 31 splines, Pro-m75, MSD 6AL, TKO, Spec Stage III, Larocca Tuned
10psi 11:1 a/f= 464rwhp 431ft/lbs
11.9@123mph @13psi 1.9 60'
hp? tq?
Moderator of General Tech
Originally Posted by po-po 5.0
I have a D1B (3-CORE) on my 1991 Mustang LX and it is awesome. My car has run a best of 10.66 @ 127 (6.79 1/8). I have had no problems with it, although it is somewhat noisey. Also this blower is capable of making upwards of 22lbs. of boost. I run 14lbs. Great blower!!!!
___________________________
1991 Mustang LX
306 DSS Super Pro Bullet
Edelbrock Performer heads
Performer RPM Intake
TFS Stage II Cam
PA C-4 Super Comp Trans.
3.55 gears
26X10" Slicks
Best et : 10.66@127 (6.79 1/8)
12:1 AFR
Originally Posted by po-po 5.0
I am not sure what year car you have, but I run a D1 on a 1991 Mustang and use a A/C pump eliminator pulley which allows me to run without A/C.
Just make sure you add an additional brace if you run the eliminator pulley, as the A/C compressor is normally used for strengthing the blower mount. It's pretty easy to make but you will have to make one to fit your application. Mine is very ridged and I have had no belt problems after adding a second brace. Good luck!!!
D1 is fine for the street. D1R is the only other blower that will bolt up directly in the D1 brackets just for additional info. obviously, thats an even meaner blower, but figured i'd let you know.
www.BoostedHorsepower.com
69 Camaro Z28
383 D1 Procharger
Procharger Sheet Metal Intercooler
750 cfm 4150
Extreme Velocity Carb Hat
Trick Flow Aluminum Heads
Edelbrock Super Victor Intake
Crower Solid Roller Cam
X2CMotorsports Tremec TKO TransTKO
Bookmarks